SPECIFICATIONS AS460e
DIMENSIONAL DRAWING
A & E SPECIFICATIONS
One Main Street, Whitinsville, MA 01588
508 234 6158
Toll Free 800 992 5013
FAX 508 234 8251
www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.
AS460e/2 pp
October 2001
Printed in USA
INDICATES MOUNTING POINT,
3/8-16 THREADED HOLE (PI ANGLE)
INDICATES MOUNTING POINT,
3/8-16 THREADED HOLE (NUT PLATE).
INDICATES CENTER OF BALANCE.
FRONT
22.50
GRILLE PARTIALLY SHOWN
24.62
BACK
6.94
ACCESS PANEL
INPUT
5.00
CL
CL
19.50
4.00
10.50
(1.50)
TOP/BOTTOM
4.00
CL
A
A
16.00
23.00
12.00
30°
10.09
(12.29)
18.67
SIDES
DIMENSIONS APPLY
TO BOTH SIDES
C
L
18.60
4.63
16.56
30°
509129 (0)
5/10/01
The bi-amplified or passive mid/high loudspeaker system
shall incorporate a horn-loaded 10-in MF cone with Radial
Phase Plug™ and a 1.4-in exit/2.5-in voice coil HF neodymi-
um compression driver.
The MF driver shall be loaded into a midrange horn construct-
ed of 1/8-in birch plywood backed with high density
polyurethane foam. The HF driver shall be loaded on a con-
stant directivity horn with a nominal coverage pattern of 60°
(h) x 45° (v). An internal passive filter network shall provide
fourth order acoustical crossover and system equalization.
System frequency response shall vary no more than ±3 dB
from 200 Hz to 15 kHz measured on axis. The mid/high sec-
tion shall produce a Sound Pressure Level (SPL) of 107 dB SPL
on axis at 1 meter with a power input of 1 Watt and shall be
capable of producing a peak output of 139 dB SPL on axis at
1 meter. The mid frequency section system shall produce a
Sound Pressure Level (SPL) of 109 dB SPL on axis at 1 meter
with a power input of 1 Watt and shall be capable of produc-
ing a peak output of 141 dB SPL on axis at 1 meter. The high
frequency section shall produce a Sound Pressure Level (SPL)
of 109 dB SPL on axis at 1 meter with a power input of 1 Watt
and shall be capable of producing a peak output of 136 dB
SPL on axis at 1 meter. The mid/high section shall handle
450 Watts of amplifier power (continuous) and shall have a
nominal impedance of 8 Ohms. The mid frequency section
shall handle 400 Watts of amplifier power. The high frequency
section shall handle 125 Watts of amplifier power (continuous)
and shall have a nominal impedance of 8 Ohms.
The loudspeaker enclosure shall be trapezoidal in shape. It
shall be constructed of multi-ply, void-free, cross-grain-lami-
nated, exterior grade, Baltic birch plywood and shall employ
extensive internal bracing. It shall be finished in wear-resist-
ant textured black paint . Input connectors shall be 2x 6-con-
tact terminal barrier strips. Eighteen (18) 3/8"-16 threaded
mounting/suspension points (4 each top, bottom and sides,
2 on back) shall be provided. The front of the loudspeaker
shall be covered with a powder coated perforated steel grille.
The mid/high loudspeaker shall be the EAW model AS460e.
Manufacturing tolerances are +/- 0.13 and +/- 1°
