31
Shorten of AB Point: when the UAV flies to the place that is close to the shorten
position, move the pitch rocker (push or pull, push at the far end, pull at the near
end), and the UAV will fly forward slowly at the speed of 2m / s. When it reaches
the extended position, return the pitch rocker to zero, the UAV will stop, and then
start to copy the corresponding route. Shorten of AB point is completed.
Figure 19 Shorten of Flight Route of AB Point
2
）
Adjust the Height
During the flight, if the UAV is in the middle position of the throttle, it will fly at a
fixed height (with radar, it will follow the terrain to fly over the ground at a fixed
height), the height will rise when the throttle is pushed up, and the height will fall
when the throttle is pulled down.
3
）
Adjust the Direction
During the flight, return the nose to the middle of the direction, the UAV will be
locked for flight. If you push left in the direction, the nose will turn left. If you
push right in the direction, the nose will turn right.
6.4.1.3 Breakpoint Resuming in AB Mode
When the UAV exits AB mode due to some reasons during the flight, and the AB
mode needs to be continued after re-preparation, the following steps should be followed
to execute breakpoint resuming in AB mode.