Weight Only Operation Instructions
If a user wants to obtain a weight reading only, please follow the directions below.
Please note that results will not be recorded by the scale for tracking purposes.
a) After installing batteries, immediately place the scale on solid, flat surface.
Note
:
Avoid carpet or other softer flooring like Pergo™ or types of linoleum or vinyl.
b) Calibrate the scale (see pg 3).
c) Step on the scale with both feet and remain steady. When the weight has
locked in, the scale will blink three times and remain on the screen for 10
seconds before automatically shutting off.
Tracking Mode Operation Instruction
If a user wants to track short and long term changes in weight, you must first set
up a user profile.
Note
: The weight tracking feature will be activated unless the
user profile is deleted.
1. Place the scale on a hard, flat floor Please leave the scale on the floor
during setup.
Note:
Avoid carpet or other softer flooring like Pergo or
types of linoleum and vinyl.
2. Calibrate the scale as follows:
If the scale is turned on when placed down on the floor, allow the scale to
turn off without standing on it.
If the scale does not turn on when placed down, press the glass platform with
one foot to turn the scale on. Step off. Allow the scale weight to go to 0.0 and
turn off without standing on it.
