![background image](http://html.mh-extra.com/html/eaton/zeb-series/zeb-series_manual_526780050.webp)
Engineering
46
10/13 MN03402007Z-DE/EN
Repair and Maintenance
The ZEB overload relays shall undergo proof test during
regular maintenance operation at least every 1 year. The
proof test procedure is explained under the installation and
operation section of this manual.
If the device observed to be failed in maintenance check it
shall be taken out of operation and return to Eaton Corpora-
tion.
This could ether be done via the local contact person
(www.eaton.com/moeller/aftersales) or under the following
number: +49(0)1805223822
Warranty
To meet the conditions of the warranty, you must oberserve
the safety and commissioning instructions and the operating
instructions.
If the overload relay found to be non operational within the
warranty period or after the warranty period it should be
returned to Eaton Corporation.
This could ether be done via the local contact person
(www.eaton.com/moeller/aftersales) or under the following
number: +49(0)1805223822
CAUTION
Faulty devices shall not be opened or repaired.
They must be replaced by specialist personnel.
Содержание ZEB Series
Страница 30: ...26 10 13 MN03402007Z DE EN ...
Страница 56: ...52 10 13 MN03402007Z DE EN ...
Страница 66: ...Anhang Appendix 62 10 13 MN03402007Z DE EN ...
Страница 69: ...EC Konformitätserklärungen EC Declarations of Conformity 65 10 13 MN03402007Z DE EN ...