Eaton XV-102 Series, Руководство по эксплуатации

Страница: 33 / 79

5 Installation
5.3 Interfaces
HMI/PLC XV-102 08/2016 MN04802004Z-EN www.eaton.com
33
Radio interference
suppression filter for the
24 V DC supply Additional interference filters must be installed for the power supply in order to adhere to the EMC B
provisions.

Integrate a radio interference suppression filter into the wiring.
Depending on the output, the following filters can be used:

XT-FIL-1 radio interference suppression filter for 24 V DC supply up to 2.2 A (Eaton article no.
285316)
or

XT-FIL-2 radio interference suppression filter for 24 V DC supply up to 12 A (Eaton article no.
118980)
Fig.. 12 Power supply with EMC filter
Grounding is ensured either by using

the filter's integrated contact fields onto a grounded metal plate
or using

a separate line to the filer's PE connection.
Depending on the current consumption or configuration, several filters may be used as well.

2.7 Marine approvals,

14
5.2.2 Conditions for marine approval (DNV GL),

25
5.4.2 Screening the communication cables used,
 56
~
=
L1
L2
L3
N
PE
24 V 0 V
U
POW
XT-FIL-1/2
24 V 0 V 24 V 0 V
U
AUX
XV-102
24 V 0 V
24 V 0 V
24 V 0 V PE
...