Eaton XV-102 Series, Руководство по эксплуатации

Страница: 19 / 79

3 Safety regulations
3.4 Device-specific hazards
HMI/PLC XV-102 08/2016 MN04802004Z-EN www.eaton.com
19
3.4 Device-specific hazards
DANGER
Explosion hazard
Death, serious injury, and property damage may occur if the device is being used in
a potentially explosive (classified) location and, during operation, an electrical plug-
in connection is disconnected or the device is exposed to dangerous impacts or oth-
er types of dangerous mechanical shock.

Use the device in the following environments only:
- Non-hazardous (non-explosive) areas
- Potentially explosive atmosphere, Zone 22 (according to ATEX 94/9/EC)

Potentially explosive atmosphere, Zone 22:
The ground resistance of accessible metal parts must be less than 10
9
ohms.

When used in a potentially explosive atmosphere, Zone 22, the environment has
to be designed to avoid any bunch discharge

Make sure that the device is not exposed to dangerous impacts and other types
of dangerous mechanical shock.

Do not operate the device in hazardous (classified) locations unless it is mounted
correctly.

De-energize the device before disconnecting plug connections.
WARNING
Live parts inside the device
When the device is open, there will be an electric shock hazard if live parts are
touched.

The device must not be opened.
WARNING
Stray currents
Large transient currents between the protective circuits of different devices may re-
sult in fire or in malfunctions due to signal interference.

If necessary, a potential equalization conductor should be installed parallel to the
cable. This should have a cross-section that is a multiple of the cable screen.
CAUTION
Electrostatic discharge
Electrostatic discharge may damage or destroy electronic components.

Avoid contact with components (such as connector pins) that are susceptible to
electrostatic discharge.

Discharge (by touching a grounded metal object) any static charge accumulated
in your body before touching the device.