4
XSTORAGE HOME FLOOR MOUNTING COMMISSIONING MANUAL
MN700001EN May 2019 www.eaton.com
3. Floor mounting frame installation
The floor mounting frame is sold as a spare part. The part number is XSTHSP1P00FV1 and the description is XST Home Floor
Mounting Frame V1.
To assemble the floor mounting frame, it is necessary to also use the mounting bracket included in the xStorage Home
accessory kit.
Please also refer to the xStorage Home installation manual and safety guidelines.
After the unpacking of the mounting bracket and the floor mounting frame, the installation can start. Please follow the
instructions below:
At this point the floor mounting frame is safely installed, as it is shown in the figure 2.
It is now possible to place the battery pack and then the inverter.
Step 1
Install the foot support on the floor mounting frame. The foot mounting is included in the xStorage Home
accessory kit.
Step 2
Screw the support plate (up) of the mounting bracket on the floor mounting frame.
Step 3
Screw the mounting bracket for the battery pack and cover on the floor mounting frame.
Step 4
Screw the mounting bracket for the inverter on the floor mounting frame.
At this step the mounting bracket is fixed on the floor mounting frame.
Step 5
Fix the floor mounting frame to the wall (mandatory) and to the floor (mandatory). Please, make sure to use
appropriate screws that are suitable for the type of wall and floor. Check that there are no vibrations.
Step 6
Add the support plates (right and left) to the support plate of the mounting bracket already fixed to the floor
mounting frame.
Figure 1: How to fix the floor mounting frame
Step 6
Step 2
Step 5
(Mandatory)
Step 5
(Mandatory)
Step 4
Step 1
Step 3
