Eaton XMCSPAN-001, Инструкция по установке и эксплуатации

Страница: 21 / 48

Power with PMCs Available Power Chassis Type
Below 70 W
1
70 W maximum 3-Row
Below 90 W
1
90 W maximum 5-Row
1 Keep below power limit. Cooling limitations must be considered.
Backplane Power Requirements
The following table lists the backplane power requirements.
Available Power Maximum Current Voltage
90 W 9 pins at 2 A +5 V
24 W 1 pin at 2 A +12 V
24 W 1 pin at 2 A -12 V
XMC/PMC Power Limitations
The following table lists the power dissipation limits as defined by specification.
Power Dissipation Limit Module
7.5 W Single-width PMC
15 W Double-width PMC
77 W Double-width XMC
12 W Single-width PrPMC without additional cooling
20 W Double-width PrPMC without additional cooling
CHECKING THE BOX CONTENTS
Static discharge can damage circuits.
Avoid touching areas of integrated circuitry or take antistatic precautions (ESD wrist strap or shoes).
6806800H03A | XMCspan Installation and Use |
21
Hardware Preparation and Installation