Eaton xComfort Bridge, Краткая инструкция по установке

Страница: 6 / 6

RF
Technical Data / Tekniske data / Technische gegevens / Technische Daten / Technická data
Power supply 5 VDC, 1 A, power unit connector, separate power unit
Power consumption Typical <0,5 W
RF 868,3MHz (xComfort compatible)
Max RF power 25 mW (ERP)
Degree of protection IP20
Operating temperature +5 to +45 °C
Storage/transportation temperature -25 to +70 °C
Housing colour Similar to RAL9010
Dimensions housing 105 x 105 x 31 mm (H x W x D)
RF
Affixing date of CE mark: 2019
Doc.Id.: CBCA-00xx_120319
Senior Vice President
Director Quality
General Manager & Systems
Friedrich Schröder Fernando Ceccarelli
Declaration of Conformity
We, EATON Industries (Austria) GmbH
3943 Schrems, Eugenia 1
Austria
declare under our sole responsibility as manufacturer that the product (family)
Eaton - Bridge
CBCA-00/xx
(the declaration of conformity applies to all
listed types within our actual product catalogue)
provided that it is installed, maintained and used in the
application intended for, with respect to the relevant
manufacturer’s
instructions, installation standards and “good engineering practices”
complies with the provisions of Council directive(s):
RED Directive 2014/53/EU
RoHS Directive 2011/65/EU
based on compliance with following standard(s):
EN 301489-3 V2.1.1, EN 300220-2 V3.2.1, EN 63044-1:2017, EN
63044-5-1:2018, EN 63044-5-2:2017, EN 62368-1:2014, EN
62479:2010, EN 50581:2012
12.03.2019
Quick_Insta_card_xComfort_Bridge.indd / 05.2019a /
IL019233ZU / 136211203