Eaton xChargeIn, Руководство пользователя

Страница: 5 / 28

xChargeIn Introduction
Manual for MID variants V1.01
5
© EATON
1.2 Purpose of the document
This document describes the MID-specific functions and features of the rele-
vant variants of xChargeIn. The document is intended for charging station
operators, calibration authorities or similar institutions.
This document describes the specific functions and features of the relevant
variants of xChargeIn. The document is intended for charging station opera-
tors, calibration authorities or similar institutions.
This document is an extension to the supplied manuals of the charging sta-
tion.
You must comply with all instructions and safety notes in the supplied
manuals!
1.3 Requirements
This document contains information for persons who meet the following re-
quirements:
Target group Required knowledge and abilities
Charging station op-
erators, calibration
authorities and simi-
lar institutions
Persons who, due to their special training, expertise and experience
as well as knowledge of current standards, are able to assess the
work performed and the possible hazards.
Knowledge about:
● current valid safety information,
● the mode of operation of the charging station,
● the displays and operating elements of the charging station.
1.4 Notes on this document
The manual is part of the product. It is to be retained over the entire life cycle
of the product and should be forwarded to any subsequent owners or users
of the product.
The instructions contained in this manual must be followed precisely. Failure
to do so could result in the creation of potential sources of danger or the dis-
abling of safety devices. Apart from the safety instructions given in this man-
ual, the safety precautions and accident prevention measures appropriate to
the situation in question must also be observed.
1.4.1 Contents of the document
● Description of the specific functions and properties of the MID variants of
xChargeIn