Eaton xChargeIn A Series Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 9

Eaton xChargeIn A Series Скачать руководство пользователя страница 4

EATON Firmware Update Instructions V1.01 of A-, X-, S- series

EATON Firmware Update Instructions V1.01 of A-, X-, S- series

4

© EATON 2019

Purpose of the document

This document describes how to perform a firmware update at xChargeIn A-series, X-
series and S-series. The firmware update can be installed on the charging station via
USB.

The current firmware is available on the EATON website:

http://www.eaton.com/evc

This document is an extension to the supplied manuals of xChargeIn.

You must comply with all instructions and safety instructions in the supplied
manuals!

Validity check

The user of this document is obliged to obtain information about the validity of this
document.

Requirements

This document contains information for persons who have technical knowledge in the
field concerned and who are suitable for carrying out the necessary operations.

Further documentation

Manuals and additional information are available on the EATON website:

http://www.eaton.com/evc

«
...
2
3
4
5
6
...
»

Содержание xChargeIn A Series










Отзывы:

Нет отзывов