Eaton XC200 Series, Руководство пользователя

Страница: 20 / 82

Design of the XC100
10/10 MN05003004Z-EN
16
CPU installation
X
Insert the loop on the bottom of the CPU module into the hole
in the module rack
.
X
Press the top of the CPU module onto the module rack, until you
hear it click into position
.
Detaching the CPU
X
Press in the catch .
X
Keep the catch pressed in, and pull the top of the CPU module
forwards
.
X
Lift up the CPU module and remove it .
h Detailed information about the installation of the
backplanes and XI/OC modules can be found in the
manual “Hardware and Engineering XI/OC Signal
Modules“ (MN05002002Z-EN; previously AWB2725-
1452GB). Here you can also find further information on
the various types of module rack and the individual slot
assignments for the CPU and the XI/OC signal modules.
Figure 15: CPU installation
1
2
2
1
Figure 16: Detaching the modules
1
2
3
1
2
3