Eaton VCP-W, Операция

Страница: 2 / 12

P a g e 2
I . L . 3778A74H01
Effective 11/97
Code plates are provided to prevent insertion of
1200/2000 amp device into 3000 amp compartment and
vice-versa. Type VCP-W manual grounding and test
devices are also available with either the upper or the
lower terminals only. Devices of the same rating with
only the upper terminals or with only the lower terminals
are coded to make them non-interchangeable by the
addition of an overlay code plate 8243A53H01 in the
breaker compartments.
1-2 OPERATION
WARNING
READ AND UNDERSTAND THESE INSTRUCTIONS
BEFORE ATTEMPTING TO USE THIS DEVICE.
IMPROPER USE CAN RESULT IN DEATH, BODILY
INJURY AND/OR PROPERTY DAMAGE.
The following general safe practices are
recommended:
•
Store the device in a clean, dry area free from
dust, dirt, moisture, etc.
•
Keep all insulating surfaces, which include
primary support insulation and insulation
barriers, clean and dry.
•
Check all primary circuit connections to make
certain that they are clean and tight.
•
Permit only authorized trained personnel to use
this device.
•
Take extreme care while using this device to
avoid contacting “Live” or “Hot” (energized)
terminals.
•
Correctly identify line and bus terminals for
the breaker compartment before using this
device.
•
Check for correct code plate(s) on the device.
Do not attempt to force the device into the
compartment.
The grounding of either upper or lower terminals is
accomplished by connecting cables (provided with the
device) from either the upper or the lower terminals to
the device ground connection. Cable testing or “phasing
out” testing may be accomplished by connecting suit-
able test equipment, as required to the terminals.