LATERAL FILE BARS
(UM14-FP and UM20-FP Bin
Drawers require only one lateral file bar at the back of
the drawer. The lip of the Bin Drawer front will serve as
the front file bar.)
Determine the location of the Lateral File Bar(s) using
figure 3 as a guide. The long vertical slots may be used
for standard height media (low bar position). The shorter
slots are for extra tall media (high bar position).
(PLEASE
NOTE: the high bar position MUST be used for the
AM14-FP and AM20-FP Bin Drawers.)
Install the Lateral File Bars with the stiffening flanges
AWAY
from the media. While holding the bar above the
drawer, insert one end into the desired slot. Lower the
opposite end of the bar and insert it into the desired slot.
Tap the bar down to seat it onto the bottom of the slots.
See figure 4.
Lateral file
bar
Slot
Slot
Slot
Roll-out
side
Roll-out
side
Push down
to seat
Roll-out
side
Lateral file
bar
Insert opposite
end
Lower to
level position
Insert
Lateral file
bar
Figure 4
Legal folder
U.S. letter folder (alternate position)
DIN A-4 folder
U.S. letter (8-1/2") folder
Low bar position
Figure 3
High bar position