Power connection
TSE80 is designed to be powered over the Ethernet
connection (PoE).
PoE Connection
PoE connection requires IEEE 802.3af standard. Utilize a
network switch or PoE injector that meets this standard.
Connect the TSE80 using a standard CAT5E or CAT6
Ethernet cable from the network switch to the LAN/PoE
jack on the back of the TSE80.
Removing the TSE80
Loosen the 2 captive screws on the underside of the
TSE80. Lift the unit upwards off the mounting frame
hooks and then pull the unit away from the mounting
frame to disengage.
Specifications
Dimensions: 223.5mm w (8.8”) x 148.3mm h (5.84”)
Mounting depth: 22mm (0.86”)
Display: 8” (203.2mm Diagonal))
Resolution: 1280 x 800
Network: 10/100/1000 Ethernet
Connections: LAN/PoE RJ45
Power Requirements: PoE - IEEE 802.3af,
13W maximum draw (@48 V 270 mA max)
Document: TSE80 9850-000671-02
Eaton - Lighting Systems
Usk House, Lakeside, Llantarnam Park, Cwmbran, NP44 3HD, UK
T: +44 (0)1923 495495 F: +44 (0)1923 228796
E: [email protected] EatonLightingSystems.com
E&OE. Changes to the products, to the information contained in this
document, and to prices are reserved; so are errors and omissions. © Eaton
Loosen the 2 captive screws
before lifting off the unit
Connecting Ethernet
When not utilizing a PoE switch, it is recommended
that you connect the TSE80 to a network switch via
a PoE injector.
Utilizing a standard CAT5E or CAT6 network Ethernet
cable connect to the LAN/PoE jack.
