5
www.eaton.com/wireless
call toll free: 1-800-663-8806
DMAN-4077-01 R01
READ ALL INSTRUCTIONS
Installation
PROVIDE A SAFETY CUTOFF SWITCH. If maintenance is required, the radio must be disconnected from power
USE PROPER WIRING. Loose or frayed wires can cause system failure, intermittent operation, machine damage, etc.
DO NOT INSTALL IN HOT AREAS. This apparatus can be damaged by heat in excess of 131°F (55°C)
Personal Safety
MAKE SURE MACHINERY AND SURROUNDING AREA IS CLEAR BEFORE OPERATING. Do not activate the remote
system unless it is safe to do so.
TURN OFF THE BASE STATION POWER BEFORE WORKING ON MACHINERY. Always disconnect the remote sys-
tem before doing any maintenance to prevent accidental operation of the machine
Care
KEEP DRY. Do not clean the RCU / base station under high pressure.
CLEAN THE UNIT AFTER OPERATION. Remove any mud, dirt, concrete, etc. from the unit to prevent clogging of
buttons, etc. by using a damp cloth.
Maintenance / Welding
DISCONNECT THE BASE STATION FROM THE MACHINE BEFORE WELDING. Failure to disconnect will result in the
destruction of the Base Station.
Safety Precautions
CAUTION:
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
Failure to follow the SAFETY PRECAUTIONS may result in radio equipment failure and/or
serious personal injury.
CAUTION:
Only use a soft cloth moistened with water when cleaning a button or the TD110.
DO NOT clean the TD110 or its buttons using any implement or object that is capable of
cutting or damaging the button membrane or housing. DO NOT pour any liquids directly
on the TD110. Never use a hose, nor water applied for any pressure. Consult with your
equipment supplier if you are unsure of the correct cleaning procedures.
Failure to follow the CLEANING PROCEDURES may result in equipment failure and/or
serious personal injury.
