MN04003009E
3
December 2003
STEP 1 (Continued)
●
When in edit mode, the parameter value can be changed by pressing
the up or down arrow keys.
●
When in edit mode, pressing the right arrow a second time will allow
you to edit the parameter value digit by digit.
●
To confirm the parameter change you must press the ENTER button.
The value will not change unless the ENTER button is pushed
.
●
Some parameters can not be changed while the SVX9000 is running.
The screen will display LOCKED if you attempt to edit these parameters
while the drive is running. Stop the drive to edit these parameters. See
the
SVX9000 Application Manual
for identification of these parameters
specific to your chosen application.
Main Menu
The data on the control keypad are arranged in menus and submenus. The
first menu level consists of M1 to M8 and is called the Main Menu. The Main
Menu is illustrated on
Page 7
. Some of the submenus will vary for each
application choice.
STEP 2
Standard Wiring Diagrams and Terminal Locations
Power and Motor Wiring Terminal Schematic for SVX9000 Drives
SVX9000 Power and Motor Wiring for Low Horsepower Drives (1 – 30 hp)
U
V
W
B+
M
3~
L1
L2
L3
L1
L2
L3
B-
R-
External
RFI-Filter
(Optional)
BR
(Optional)
External
Filter
(Optional)
BR
Power
Board
230V 1 – 15 hp
480V 1-1/2 – 30 hp
Control
Board
MN04003009E.fm Page 3 Thursday, February 17, 2005 11:59 AM