Installation Instructions for Field Installing the Sure-Lites Two Circuit (2C) Exit Sign Conversion Kit
MAINTENANCE
None required. However, we recommend that the equipment
be tested regularly in accordance with local codes.
NOTE:
Servicing of any parts should be performed by qualified
personnel. Only use replacement parts supplied by Eaton
Lighting.
CAUTION:
This equipment is furnished with a sophisticated low
voltage battery dropout circuit to protect the battery from over
discharge after its useful output has been used. Allow 24 hours
recharge time after installation or power failure for 90 minute
testing. If connected to 240VAC supply, allow 48 hours recharge
time.
TROUBLE SHOOTING GUIDE
If LED display does not illuminate, check the following:
1. Check AC supply – verify that unit has 24 hour AC supply.
2. Unit is shorted.
3. following the above trouble shooting hints does not solve
your problem, contact your local Eaton representative for
assistance.
SCHEMATIC
ORANGE LEAD - TO 277 OR 240V
BLACK LEAD - TO 120V
WHITE LEAD - TO NEUTRAL
BLACK LEAD - TO 120V
WHITE LEAD - TO NEUTRAL
ORANGE LEAD - TO 277 OR 240V
POWER
POWER
GREEN
RED
Warranties and Limitation of Liability
Please refer to
www.eaton.com/LightingWarrantyTerms
for our terms and conditions.
© 2016 Eaton
All Rights Reserved
Printed in USA
Impreso en los EE. UU.
Publication No. IB505024EN
January, 1 2016
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton is a registered trademark.
All trademarks are property
of their respective owners.
Eaton es una marca comercial
registrada. Todas las marcas
comerciales son propiedad de sus
respectivos propietarios.
