70
Eaton Static Transfer Switch 2000A 3-Pole Installation and Operation Manual 164001127—Rev 01
Figure 32. Plots Screen
The plots displayed
are for the
highlighted event.
Touch
Now
to
generate an
immediate plot.
Source 1 and 2
Voltages
Outage
Output Voltage
and Amperage
shown in
plots
Scroll to
highlight
event.
Touch
Clear
to
clear all plots.
The bottom panel displays a list of events with the date-time stamp of the event. The STS records waveforms
for up to 25 events.
These events generate waveform plots:
•
Outages (automatic transfers due to a source going out of specification)
•
Dual outages, where both sources fail
•
Manual transfers
•
Immediate user-requested plot (
Now
button)
Touching the
Now
button will result in an instantaneous plot with the event name
Operator
.
The scroll bar on the right of the event list panel allows the user to scroll through the event list to display the
waveform captures for a specific event.
The top four panels are the plots associated with the currently highlighted event. These four panels display the
three phases of each source and output as waveforms captures. The waveforms are color-coded for each
phase: Phase A is blue, Phase B is red, and Phase C is black. These displays show breaks in the waves if there
has been an outage or a transfer.
Touch the
Clear
button to clear all plots.
Содержание STS 2000A
