3
Sliding Keyboard/Pedestal Bracket
EATON
www.eaton.com
Instruction Sheet
IL211024EN
Effective May 2018
3
3. To install the Sliding Keyboard/Pedestal Bracket
assembly to the underside of the TechBench™, align
the cut-out in the assembly with the front Stiffener
and push the assembly up against the underside of the
worksurface. See figure 2.
Figure 3
(Worksurface not shown)
4. Push the assembly toward the rear of the bench to
engage the flanges with the front and rear Stiffeners.
See figure 3.
Figure 2
(Worksurface not shown)
Front Stiffener
Rear Stiffener
Sliding Keyboard/Pedestal Bracket
assembly
Flange
Flange
Cut-out
Front Stiffener
Rear Stiffener
Flange
Flange
91647
Figure 2.
(Worksurface not shown)
Figure 3.
(Worksurface not shown)
91647
3. To install the Sliding Keyboard/Pedestal Bracket
assembly to the underside of the TechBench
™
, align
the cut-out in the assembly with the front Stiffener
and push the assembly up against the underside of
the worksurface. See figure 2.
4. Push the assembly toward the rear of the bench
to engage the flanges with the front and rear
Stiffeners. See figure 3.
