Eaton Single EBC Скачать руководство пользователя страница 10

4

External Battery Cabinets

Chapter 2       Safety Warnings

IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS

This manual contains important instructions that should be followed during installation and 
maintenance of the accessories and batteries. Read all instructions before operating the equipment 
and save this manual for future reference.

The Accessories are designed for industrial or computer room applications with UPS, and contains 
safety shields behind the door and front panels. However, any installation and operations should be 
handled with appropriate care.

DANGER

The Accessories may contain LETHAL VOLTAGES. All repairs and service should be performed by 
AUTHORISED SERVICE PERSONNEL ONLY. 

WARNING

• 

The Accessories are suitable for mounting on concrete or other non-combustible surfaces only.

• 

The terminals may carry live voltage even when the Accessory is connected to UPS.

• 

To reduce the risk of fire or electric shock, install the Accessory and UPS in a temperature and 
humidity controlled, indoor environment, free of conductive contaminants. Ambient temperature 
must not exceed 40°C (104°F). Do not operate near water or excessive humidity (95% 
maximum). 

• 

As a result of the connected loads high leakage current is possible. Connection to earth ground is 
required for safety and proper product operation. Do not check Accessory or UPS operation by 
any action that includes removal of the earth (ground) connection with loads attached.

• 

Ensure all power is disconnected before performing installation or service.

• 

Batteries can present a risk of electrical shock or burn as high short-circuits current. The following 
precautions should be observed: 1) Remove watches, rings, or other metal objects;2) Use tools 
with insulated handles; 3) Do not lay tools or metal parts on top of batteries; 4) Wear rubber 
gloves and boots.

• 

ELECTRIC ENERGY HAZARD. Do not attempt to alter any Accessory, UPS or battery wiring or 
connectors. Attempting to alter wiring can cause injury.

• 

Do not open or mutilate batteries. Released electrolyte is harmful to the skin and eyes. It may be 
toxic.

CAUTION

• 

Installation or service should be performed by qualified service personnel knowledgeable of 
UPS, UPS Accessory and battery systems, and required precautions. Keep unauthorized 
personnel away from equipment. Consider all warnings, cautions, and notes before installing or 
servicing equipment. DO NOT DISCONNECT the batteries while the UPS is in Battery mode.

• 

Batteries may only be replaced with the same number and type by authorized service 
personnel. No user serviceable parts.

• 

The UPS system has been evaluated for use with a maximum of two EBCs (Double EBC). Use 
of any other configuration may result in fire, death, and voiding of the warranty.

• 

Disconnect the charging source prior to connecting or disconnecting battery terminals.

• 

Determine if the battery is inadvertently grounded. If it is, remove the source of the ground.

• 

Contacting any part of a grounded battery can cause a risk of electric shock. An electric shock is 
less likely if you disconnect the grounding connection before you work on the batteries.

Содержание Single EBC





































Отзывы: