30
EATON CORPORATION
www.eaton.com
Installation Instructions for Series NRX
Ethernet Communications Adapter
Module
Instruction Leaflet
IL01301052E
effective May 2012
Firmware Show ECAM and Trip Unit firmware versions.
Follow these steps to upload new firmware to ECAM:
1. Make sure the latest firmware file is loaded on your local hard drive.
2. Click <Upload Firmware> and select the latest firmware file.
3. Once the file has been selected, double click the filename or click <Open> to download the file.
4. You will be asked to wait a few minutes while the new firmware is loaded. When the new firmware is ready ECAM will prompt you to click
<Yes> to complete the firmware update.
5. Click <Yes> to reboot ECAM and wait approximately 2 minutes for ECAM to reboot.
otee:
N
The Firmware page also has a button that will clear all configuration data from ECAM memory. Once the command has been initiated, all configurations will be
lost
Screen Shot 23. Firmware Configuration Settings
