![background image](http://html1.mh-extra.com/html/eaton/rvu-series/rvu-series_operating-instructions-manual_4697072013.webp)
USER MANUAL & SERVICE INSTRUCTIONS
Changing Anti-Pumping Relay:
Changing Spring Charge Motor:
Unravel the anti-pumping relay’s link. Dislodge the anti-pumping relay by pulling. Press the new anti-pumping relay to
insert its place. Insert the link.
Pull down the track clip to take off motor protection fuse. Push the locks of the clip and remove the connections of
electrical cables. Remove bolts. After removing bolts, take the motor outside carefully. Put the new motor into its place
and make all connections again (install the bolts, connect the electrical cables and insert the motor protection fuse).
11