Eaton RPM-3U, Руководство пользователя, Страница: 21 / 34

Eaton Rack Power Module 164201675—Rev 02 15
C Chhaapptteerr 33 O Oppeerraattiioonn
33..11 IInnttrroodduuccttiioonn
The Rack Power Module (RPM-3U/3Ui) distributes output from a UPS or utility power to twelve poles. The
poles are grouped into two banks of six poles, with each bank corresponding to an output plate on the back of
the RPM-3U/3Ui. Each output plate contains a set of distribution receptacles. The two output plates may be of
the same receptacle type or different types.
See “ 4.1 Specifications ” for a complete list of available output plate receptacle types.
Figure 10 shows an example of a rear panel.
Figure 10. RPM-3U/3Ui Rear Panel [Plug-Receptacle Unit with IEC 320-C19 (208 Vac) Output Plates
Shown]
Output Plate Left
Output Plate Right
Input Plate
The RPM-3U/3Ui front panel controls the power distribution and communicates its status. Figure 11 shows an
example of a front panel.
Figure 11. RPM-3U/3Ui Front Panel (Standard 208Y/120V Unit Shown)
LED Display Breakers Alarm and Power
Indicators
Transient Voltage
Surge Suppression
(TVSS) Indicator
Service Only
Port and Switches X-Slot Communication Bay