Eaton Rapid Link RAMO5, Руководство пользователя

Страница: 29 / 218

1 Rapid Link system 5
1.6 Selection criteria
Rapid Link 5 · RAMO5 · RASP5 10/19 MN034004EN www.eaton.com
25
1.6 Selection criteria
Select RAMO5 or RASP5 ③ according to supply voltage U
LN
of the supply
system ① and the rated operational current of the assigned motor ② .
The circuit type ( Δ /  ) of the motor must be selected according to the
supply voltage ① . The RASP’s rated output current I
e
from the RASP5 must
be greater than or equal to the rated motor current. For RAMO5, current
monitoring must be set to the rated motor current.
Figure 7: Selection criteria
When selecting the drive, the following criteria must be known:
• Type of motor (three-phase asynchronous motor)
• Grid voltage = rated voltage of the motor (e. g. 3~ 400 V),
• Rated motor current (recommended value, dependent on the circuit type
and the supply power supply)
• Load Torque,
• Starting torque,
• Ambient temperature range.
ATTENTION
Do not connect or disconnect power connectors (mains, motor)
while RAMO5 and RASP5 are operational.
230 / 400 V ∆ / 
4.6 / 2.6
1.1
0.81
ϕ
cos
kW
min
-1
1430 50 Hz
A
②
①
U, I, f
③