background image

                        

 

 

 
  
 

Power Xpert Ethernet Switch 

 

PXES6P Series 

 

Installation and User Guide 

 

           

 

 

Power Xpert Ethernet PXES6P Series Switch

  

Installation and User Guide

 

 

Trademarks

 

Ethernet is a trademark of Xerox Corporation 
NEBS is a trademark of Telcordia Technologies 
UL is a registered trademark of Underwriters Laboratories 

 
 
Important:

  The PXES6P Series 10/100 Mb/s Switches contains no user serviceable 

parts.  Attempted service by unauthorized personnel shall render all warranties null 
and void.  If problems are experienced with PXES6P 10/100 Mb/s Switch products, 
consult Section 5, troubleshooting, of this User Guide. 
 

 
Copyright 

©

 2006 EATON.  All rights reserved.  No part of this publication may be reproduced 

without prior written permission from Eaton. 

 

Printed in the United States of America. 

 

Federal Communications Commission 

Radio Frequency Interference Statement 

 

 

This equipment generates, uses and can radiate frequency energy and if not installed 

and used properly, that is in strict accordance with the manufacturer's instructions, may cause 

interference to radio communication.  It has been tested and found to comply with the limits for a 

Class A computing device in accordance with the specifications in Subpart J of Part 15 of FCC 

rules, which are designed to provide reasonable protection against such interference when 

operated in a commercial environment.  Operation of this equipment in a residential area is 

likely to cause interference, in which case the user, at his own expense, will be required to take 

whatever measures may be required to correct the interference. 

 

Содержание PXES6P24V





















Отзывы: