Page 2 of 2
OPERATION
1. Find a suitable location for the PSFi. The PSFi requires free airflow for cooling. Do not stack items
on top of the PSFi.
2. Connect load equipment to PSFi filter using appropriate leads.
3. Connect to a suitable power outlet. As the unit has no power switch, it is important that the power
outlet’s switch be easily accessible.
4. Apply power. “Power’ indicator should light. If not, check connections or test power outlet with a
known ‘good’ device.
TECHNICAL SPECIFICATION
PSF10i
PSF16i
Number of ports
2 Port
Method of mounting
Portable.
Input voltage – Uc
200-250VAC 1
Maximum continuous voltage – MCOV
320VAC
Temporary overvoltage - TOV
350VAC 15 mins
Service type
Single-phase, Line/Neutral/Earth
Test classification
Class III
Nominal discharge current - In 8/20us
I
n
L-N 20kA, N-E 3kA, L-E 3kA
Current rating - continuous
10 Amps
16 Amps
Recommended maximum over current protection
20A upstream circuit breaker or fuse.
Residual current
<0.5 mA
Protection modes
Line-Neutral, Line-Earth, Neutral-Earth
Maxi surge current - Ismax 8/20us (Line-Neutral)
40kA
Nominal surge lifetime
15 hits @ 20kA (8/20uS, each mode)
Filter attenuation
40dB nominal at 1MHz
Initial clamp voltage (Line-Neutral)
560V (350Vac RMS)
Initial clamp voltage (Line-Earth, Neutral-Earth)
680V (420Vac RMS)
Residual voltage (Vpl) Line-Neutral 8/20us
<900V @ 3kA
Internal protection (fusing)
Thermal fusing on primary MOVs
Terminations
Input - IEC C14 10A (1)
Output - IEC C13 10A (1)
Input - IEC C20 16A (1)
Output - IEC C19 16A (1)
Alarms/indicators
2 part display, Power OK, Protection fault.
Location Category
Indoor
Enclosure rating
IP24
Standards. Designed in accordance with :
IEC61643-11, IEC610006-1,2,3,4 ANSI/IEEE C62.41 Cat B
AS1768-1991 Cat B AS3000,AS3100,
Dimensions
205mm (L) x 90mm (W) x 55mm (H)
Weight
1kg
Environment
-10 to 50
C, 0 to 95%RH (non-condensing)
Warranty
1 year, workmanship and materials
Specifications are subject to change without notice. Copyright 2015 Eaton Industries Pty Ltd
Two indicator lights are fitted to the unit for mains power and
protection failure indication:
Normal operation is indicated with the blue ‘Power On’ LED
being lit.
In the event of MOV failure, the 'Fault' LED will light to inform
the operator that the unit requires replacement.
IMPORTANT
: If the ‘Fault’ light illuminates during operation, or
the unit appears to malfunction in any way, return the unit for
service or replacement.
Service Hotline 1300 303 059.
