4 Operational
4.5 Handling the keypad
DC1…20… and DC1…OE1 Variable Frequency Drives
02/20 MN040059EN
www.eaton.com
131
4.5.3 Keypad usage examples
4.5.3.1 Adjust parameters
Table 24: Modify parameters
4.5.3.2 Resetting Parameters (RESET)
Table 25: Resetting parameters (RESET)
Commands
Description
Press the
OK
button and hold it down for two seconds in order to access the parameter interface.
→
The display will show the parameter that was last used.
Use the
▲
and
▼
buttons to select a parameter.
Press the
OK
button.
The value of the selected parameter can be changed.
Use the
▲
and
▼
buttons to change the parameter’s value.
Press the
OK
button to confirm the parameter value change.
As soon as the parameter is displayed, the value will have been saved.
Press the
OK
button and hold it down for two seconds in order to exit the parameter interface (display: "
Stop
").
Commands
Description
Reset to default settings
+
+
Press the
▲
and
▼
and STOP buttons and hold them down for two seconds.
→
All parameters will be restored to their default settings.
The display will show
P-dEF
.
Resetting after a fault
Press the
STOP
button to reset a fault message.
The display will show
StoP
.
