UPS SETUP
EATON
Powerware
®
9355 Parallel UPS (10/15 kVA) User’s Guide
S
164201601 Rev A
www.powerware.com
10
2.
Remove the four M4 screws securing the stabilizing bracket to the
cabinet rear panel and remove the bracket (see Figure 3). Retain the
hardware for later use.
NOTE
Be sure to retain the stabilizing bracket and hardware for later re-assembly onto the
cabinet.
3.
Remove the front cover from the bottom cabinet to access the
front shipping bracket.
Press and release the handle latch at the bottom of the cover and
then lift the cover up and off the cabinet.
4.
Remove the three M10 bolts securing the rear shipping pad to the
pallet and remove the shipping pad.
