Eaton 9170+ Flash Instructions
9170+ Flash Procedure
Eaton 9170+ Flash Procedure
IL153001EN
Page 11 of 12
4. Verifying the Firmware Flash
1. Verify that all of the power modules and interface board have been updated.
2. Press the Menu button on the front display.
3. Press the down arrow button until the display reads SYSTEM ID.
4. Press the Enter button.
5. Press the down arrow button until the display reads SOFTWARE VERSION. This
menu item will indicate the current firmware version of the interface board. The
interface board is identified by the system setting in the menu and the number 0 in
the upper right hand corner of the display.
