Eaton Power Xpert PXGMS, Быстрый старт

Страница: 25 / 28

Eaton PXGMS Card Quick Start Instructions 164000208—Rev 4 21
C Chhaapptteerr 88 R Reeggiisstteerr aa P Prreeddiicctt P Puullssee S Suubbssccrriippttiioonn
Predict Pulse ™ is a remote monitoring and management subscription service that collects and analyzes data
from connected power infrastructure devices, providing Eaton with the insight needed to make
recommendations and take action on your behalf. This service has limited availability outside of the United
States. For more information go to
www.eaton.com/predictpulse.
NOTE Contact your Eaton service representative for availability of Predict Pulse in your region.
Use either the universal Predict Pulse Subscription Wizard or the PXGMS PredictPulse setup feature to
configure your profile and register the Eaton UPS devices monitored by Predict Pulse .
The universal Predict Pulse Wizard can be downloaded from the Predict Pulse web site to begin your
subscription registration. Using this method, you can register devices individually or as a group.
However, the latest firmware for the PXGMS and PXGX UPS cards contain a Predict Pulse activation set-up
feature. As long as these cards are on your network, you can quickly activate subscriptions without the wizard
and save time.
To begin registering with the set-up feature, follow this procedure. An e-mail with additional instructions to
finish registering and configuring your card is automatically sent to the provided e-mail address.
To register an installed PXGMS card for Predict Pulse :
1. Locate the Predict Pulse selection under the Configuration menu on the Power Xpert Gateway window.
NOTE If there isn't a Predict Pulse selection, either update your firmware or download the
universal Predict Pulse Wizard from www.eaton.com/predictpulse and follow the
instructions in the Wizard and subsequent e-mail messages.
NOTE Refer to the Eaton Power Xpert Gateway Minislot (PXGMS) User’s Guide for more
information.
2. On the Power Xpert Gateway window, select Configuration > PredictPulse (see Figure 14 ).