Eaton Power Xpert Gateway 200E, Руководство пользователя и инструкция по установке

Страница: 71 / 212

CHAPTER 8 - PXG200E CONFIGURATION WEB PAGE
63 EATON PXG200E User Manual • IM02603001E Rev 5, 11-May-2012 • Firmware Version 5.03:3835
5. If there is more than one Bus in the system, select the Bus to which the
new device will be added
(Figure 58, A) .
Figure 58
6. Click on the button (Figure 58, B) to proceed to Step 8 if you are
satisfied with your selection.
7. Click on the button (Figure 58, C) to go back to Step 1 if you wish
to change the selection.
8. Select the type of device from the “What is the Device Type” drop-down
menu
(Figure 59, A) . Note that the list of device types presented
depends upon the device selected in Step 2 .
9. Click on the button (Figure 59, B) to proceed to Step 11 if you are
satisfied with your selection.
10. Click on the button (Figure 59, C) to go back to Step 1 if you wish
to change the selection.
Figure 59
PXG200E_228
A
C
B
PXG200E_229
A
B C
RETURN