Eaton Power Xpert 9395C, Инструкция по установке и эксплуатации

Страница: 30 / 175

Eaton Power Xpert 9395C UPS Installation and Operation Manual 164000821—Rev 06 13
33..22..33 IInnssttaallllaattiioonn C Coonnssiiddeerraattiioonnss
The UPS system installation must meet the following guidelines:
• The system must be installed on a level floor suitable for computer or electronic equipment.
• The system must be installed in a temperature and humidity controlled indoor area free of conductive
contaminants.
Failure to follow guidelines may void your warranty.
The UPS equipment operating environment must meet the weight requirements shown in Table 2 and the size
requirements shown in Figure 2 through Figure 10 . Dimensions are in millimeters (inches).
Table 2 includes the weights of the heaviest cabinet configuration. Actual weights may be less due to the
installed configuration. Weights are in kilograms (pounds).
Table 2. UPS Cabinet Maximum Weights
Model Section
Maximum Weight
kg (lb)
Shipping
Installed
Eaton 9395C-1000/1000 UPS (Total) 2539.8 (5599)
2401.8 [5295]
Eaton 9395C-1000/1100
ISBM 817.4 (1802)
773.4 (1705)
Eaton 9395C-1100/1100
PM 1722.4 (3797) 1628.4 (3590)
NOTE Table 5 describes power ratings
The UPS cabinets use forced air cooling to regulate internal component temperature. Air inlets are in the front
of the cabinet and outlets are in the top. Allow clearance in front of and above each cabinet for proper air
circulation. The clearances required around the UPS cabinet are shown in
Table 3 .
Dimensions are in millimeters (inches).
Table 3. UPS Cabinet Clearances
From Top of Cabinet 457.2 mm (18”) minimum clearance for ventilation
From Front of Cabinet
914.4 mm (36”) working space
From Back of Cabinet
None Required
From Right Side of Cabinet None Required
From Left Side of Cabinet
None Required
The basic environmental requirements for operation of the UPS are:
• Recommended Operating Range: 20–25ºC (68–77ºF)
• Maximum Relative Humidity: 95%, non-condensing
UPS Installation Plan and Unpacking