Eaton Power Xpert 9395, Руководство по установке

Страница: 41 / 56

INSTALLATION
Power Xpert 9395 Integrated Battery Cabinet (Model 1085 and 1085HR) Installation Manual
S
164201687 Rev 4
www.eaton.com/powerquality 4-17
Installation Checklist
-
All battery cabinets are the same model and rating.
-
All packing materials and restraints have been removed from each cabinet.
-
The battery cabinet is installed on a level floor suitable for computer or electronic equipment.
-
Each cabinet in the battery system is placed in its correct location.
-
A cabinet grounding/mounting kit is installed between any cabinets that are bolted together.
-
A ground wire is installed between all cabinets.
-
All conduits and cables are properly routed to the battery cabinets.
-
A ground conductor is properly installed to the UPS cabinet.
-
Battery cables are terminated on the E4 (+) and E5 (–) terminals in the UPS cabinet.
-
Internal battery cabinet connections such as cables and plugs have been completed.
-
Battery Shunt trip and Aux contact signal wiring is connected from the battery breaker to the UPS.
-
The EMP is installed and set up by an authorized Eaton Corporation Customer Service Engineer.
-
Air conditioning equipment is installed and operating correctly.
-
The area around the installed battery system is clean and dust‐free.
-
Adequate working area exists around the battery cabinet and other cabinets.
-
Adequate lighting is provided around all battery cabinet equipment.
-
A remote battery disconnect control is mounted in its installed location and its wiring is terminated inside the battery
cabinet (OPTIONAL).
-
A 120 Vac service outlet is located within 7.5 meters (25 feet) of the battery cabinet.
-
The debris shield covering the battery cabinet ventilation grill is removed.
-
Startup and operational checks are performed by an authorized Eaton Customer Service Engineer.