3
Instruction Leaflet
IL0131088EN
Effective May 2015
Series NRX with PXR - Instructions for
Spring Release, Latch Check Switch,
and Motor Operator
EATON
www.eaton.com
Figure 5.
SR Mounting Location
Step 3.
Step 4:
Position the spring release as shown to begin the installation
process (Figure 6).
Note:
The spring release is secured in its mounted position with one captive
retaining screw.
Figure 6.
Captive Mounting Screw
Step 4.
Section 2: Installation of Spring Release
Proceed with the following eight steps.
Step 1:
Remove the four screws holding the front cover in place (two
on each side of the cover).
Figure 3. Step 1.
Step 2:
Remove the front cover. Pull down on the charging handle to
simplify removal.
Figure 4. Step 2.
Step 3:
To gain access to the mounting location, pull the charging
handle down as shown in Figure 5.