Eaton Power Defense 32-NF, Инструкция

Страница: 3 / 11

3
Instruction Leaflet IL0131080EN
Effective January 2019
3-way multi-family drawout cable interlock kit - type 32 - NF
EATON
www.eaton.com
Table 2. Interlock assembly kits for interconnected breakers
Interconnected
breaker
Interlock assembly kit
for fixed breaker
Interlock assembly kit
for drawout breaker
RF frame IZMX-MIL32C-F16-2 IZMX-MIL32C-W16-2
NF frame IZMX-MIL32C-F40-2 IZMX-MIL32C-W40-2
Magnum IZM97 or IZM99 IZM-MCI32-F IZM-MCI32-W
Magnum DST or SB MCI3W32FX MCI3W32DO
Table 3. Interconnecting cable kits (two cables per kit)
a
Cable kit length Catalogue number
1,5 m (5 ft) IZMX-MIL-CAB1520-2
1,8 m (6 ft) IZMX-MIL-CAB1830-2
2,4 m (8 ft) IZMX-MIL-CAB2440-2
3,0 m (10 ft)
IZMX-MIL-CAB3050-2
a Cable kits are purchased separately as needed.
(A) (B) (C) (D) (E)
(F)
(H)
(G)
(I)
M3 x 8 mm
flathead screw
2x
Lock
washer
3x
M6 x 12 mm
hex bolt
3x
Interlock
assembly
1x
Trip pin
1x
Grease tube
1x
Cable bracket
4x
M6 x 10 mm
thread-forming
screws
4x
30,5 mm (1,2 inch)
cable tube spacer
1x
Drive arm
1x
(J)
Figure 2. Interlock kit part identification, includes parts to install on a single drawout Type NF frame breaker and cassette
(does not include cables)
(M)
(L) (K)
(M)
Pre-installed on
long rod end
(L)
Pre-installed on
short rod end
Cable assembly (see Table 3 )
2x
38,1 mm (1,5 in)
cable tube spacer,
one pre-installed on each
cable assembly and
two shipped loose
4x
22,2 mm (0,875 in)
cable tube spacer, one
pre-installed on each
cable assembly
2x
Figure 3. Interconnecting cable kit part identification (includes cables)