Eaton Pow-R-Line SPX0361126, Руководство по обслуживанию

Страница: 329 / 584

RP01400001E For more information visit: www.eatonelectrical.com
Renewal Parts
Effective: February 2009 Page
3
Current Cutler-Hammer
Panelboards
Procedure for Identifying
Panelboard Type
The current line of Pow-R-line C
panelboards was introduced in 1993.
A panelboard is identified by data
found on the nameplate. Pow-R-Line C
panelboard nameplates are different
in appearance, but all have the same
critical information:
■
Ampere rating of the main.
■
Ampere rating of the neutral.
■ Type of service (phase/wire).
■
Manufacturing location.
■
Type of panel.
■
General order number.
In the event the nameplate is missing,
it may still be possible to identify the
panel type by location of the neutral bar.
The illustrations to the right shows the
position of the neutral in the panelboard.
Figure 1. Position of the Neutral in the
Panelboard
PRL4F panels with vertical mounted main
switch will have the neutral mounted at the
opposite end the main.
Box width may also help identify the
panelboard type. Standard width for
PRL1a, PRL2a, and PRL3a is 20.00
inches (508.0 mm). PRL4 standard
widths are 24.00, 36.00 and 44.00
inches (609.6, 914.4 and 1117.6 mm).
WARNING
HAZARDOUS VOLTAGE WILL CAUSE
SEVERE INJURY OR DEATH. TURN
OFF POWER SUPPLY TO EQUIPMENT
BEFORE WORKING ON IT.
Procedure for Identifying
Renewal Parts
1. Identify the type of panelboard,
i.e. PRL1a, PRL2a, PRL3a, PRL4,
PRL5P by reading the nameplate.
Follow the procedure listed to
the left.
2. Refer to the listing below and turn
to the proper section in this bro-
chure to identify standard parts.
Description Page
PRL1a and PRL2a . . . . . . . . . . . . 5
PRL3a . . . . . . . . . . . . . . . . . . . . . . 21
PRL4B/F . . . . . . . . . . . . . . . . . . . . 26
PRL5P . . . . . . . . . . . . . . . . . . . . . . 35
PRL1a-LX (Column Width) . . . . 41
PRL2a-LX (Column Width) . . . . 41
Pow-R-Command . . . . . . . . . . . . 42
Trim Locks . . . . . . . . . . . . . . . . . . 19
Trim Clamps . . . . . . . . . . . . . . . . 20
Energy Sentinel . . . . . . . . . . . . . 31
Special Trims and Enclosures . . 32
3. This book identifies those replace-
ment parts most frequently
ordered and which are readily
available from stock. These parts
can be ordered by style or catalog
number to speed up processing
and delivery.
Distributor Ordering Instructions
1. Specify part by style/part number.
2. Refer to PL01400001E for pricing
information. Discount Symbol
CE9 applies.
3. Turn to Page 4 to locate nearest
Satellite Plant.
4. Enter the order on the satellite
plant via mail, fax or phone.
5. Selling policy 25-000 applies.
Gutter
N
e
u
t
r
a
l
N
Main
Gutter
N
Gutter
Pow-R-Line
1a, 2a
Pow-R-Line
3a
Pow-R-Line
4B/F