Eaton PDI WaveStar, Руководство по установке и эксплуатации

Страница: 26 / 68

16 Eaton PDI WaveStar Color Monitor Setup and Operation Manual P-164001109—Rev 01
Figure 12. Calibrating the Touchscreen
44..22 N Neettw woorrkk S Seettuupp
NOTE Improper configuration of a WaveStar Color Monitor may conflict with other monitors or
devices on the network.
44..22..11 D Doow wnnssttrreeaam m M Mooddbbuuss D Deevviiccee C Chhaaiinn S Seettuupp
To set Modbus device chain parameters, touch DEVICES/MODBUS (see Figure 13 ):
• Number of Devices should equal the number of devices in the Monitor’s device chain. Up to twenty (20)
devices are allowed. The Monitor uses this number to determine how many devices to search for in its
downstream chain.
• When you add new devices, increment this counter, then press "ENTER". The Monitor will automatically
start a new search and find all of the downstream devices. The devices will then be listed in the
DEVICES
Screen, where the added devices will initially show up as generic device names.
• For each new device the user should then enter a unique device name. Unique device names are needed
to isolate alarms and measurements to specific devices.
Setup: Monitor and Network