Eaton PDI WaveStar TFA STS 250-600A, Инструкция по установке и эксплуатации

Страница: 18 / 150

4 Eaton PDI WaveStar TFA Static Transfer Switch Installation and Operation Manual P-164001113—Rev 01
• Relative humidity: 0 to 95% without condensation
• Audible Noise: ≤ 60 dBA at 5 ft. without alarm activation
22..22..22 S Sttoorraaggee C Coonnddiittiioonnss
If the TFA STS is not to be immediately installed and energized, it should be carefully stored in a warm, dry
environment, preferably a heated building with air circulation and a uniform temperature to prevent
condensation. The TFA STS should be stored in its factory protective coverings and should be kept free of
contamination.
Storage temperature range must be within these limits: -40° to +80°C.
22..22..33 O Otthheerr S Sppeecciiffiiccaattiioonnss
Other TFA STS specifications can be found on the TFA STS product page on the Eaton website:
https://www.eaton.com/us/en-us/catalog/backup-power-ups-surge-it-power-distribution/eaton-pdi-tfa-static-
transfer-switch.html
22..33 S Syysstteem m LLaayyoouutt
Figure 1 shows the layout of the TFA STS 250-600A and Figure 2 shows the layout of the TFA STS 800-1200A.
Figures 3 and 5 show views of the TFA STS with covers on and off. Figure 4 shows operator interfaces. Figure
6 has an electrical submittal drawing.
System Description