Eaton PDI WaveStar Infinity 2, Руководство по установке и эксплуатации

Страница: 66 / 78

56 Eaton PDI WaveStar Infinity 2 Monitoring System Setup and Operation Manual P-164001106—Rev 01
66..22..33 R Reesseettttiinngg A Accccuum muullaattoorrss aanndd M Miinn//M Maaxx R Reeaaddiinnggss — — C Clleeaarr M Meetteerrss
Analogs sensors have accumulators for KWH and minimum and maximum readings for A and KW. A logged-in
user can reset these accumulators using the
CLEAR METERS button. (see Figure 43 ) You have these options:
• CLEAR MIN/MAX for all sensors or specific sensors
• CLEAR KWH for all sensors or specific sensors
Figure 43. Clear Meters
66..33 D Diiggiittaall P Pooiinnttss S Sttaattuuss
Status for Digital Points is shown on the related Sensor Status screen:
• Transformer digital points, see Transformer Sensor Status screen ( Figure 36 ).
• Digital Inputs, see Digital 1 , Digital 2, etc., Sensor Status screen ( Figure 35 ).
• Relays, see Relay 1 , Relay 2 , etc., Sensor Status screen ( Figure 37 ).
Digital Inputs status for circuit breakers with aux contacts is shown on the HOME screen ( Figure 38 ).
Operation: Monitoring Your System