Eaton NZM3-4-XKSA, Инструкция

Страница: 2 / 2

2/2 Emergency On Call Service: Local representative ( http://www.eaton.com/moeller/aftersales ) or +49 (0) 180 5 223822 (de, en)
03/12 I
L01208010Z
Eaton Industries GmbH, Hein-Moeller-Straße 7-11, 53115 Bonn, Germany
© 2002 by Eaton Industries GmbH,
www.eaton.com/moeller/support All Rights Reserved
03/12 IL01208010Z 12256582/DE17 DHW/DM
Printed in Germany (04/12)
j Combination options – Kombinationsmöglichkeiten – Combinaisons possibles – Combinaciones posibles – Combinazioni possibili –
Комбинационные возможности
F 415 V j + j j
F 525 V j + j j +
> 525 V j + j + j +
USE of Terminal Cover NZM3(-4)-XKSA on UL/CSA models:
– Terminal cover NZM3(-4)-XKSA maintains electrical clearances and provides protection against accidental contact
with live parts in the incoming and outgoing supply circuit terminations of the circuit breaker or switch.
– Top and bottom portions of the terminal cover are mounted as shown in preceeding diagrams.
– Use of the NZM3(-4)-XKSA terminal cover is always necessary with Type XKS screw terminations when making
connections with bare bus or non-insulated crimp lugs, or when two wires per phase are connected.
– Follow guidelines illustrated above for additional connection combinations.
1
Z 2
2 Nm
(17.7 lb- i n)
4 x M5 x 75/25
3
2
1
NZM3-XKA2 Compression
Crimp lugs
Use the terminal cover Type NZM3(-4)-XKSA
in all cases when making connections with
lug types pictured.
Connector Type
NZM3-XKA1
Top and bottom portions of Terminal cover Type NZM3-XKSA shown shaded in above diagrams.
Z 2
1 Nm
(9 lb/in)
60
60
2
Minimum Clearance
space for all models
mm inch
60 2.4
f
400 mm
(
f
16”)
XKSA
XKSA XKSA
XKSA XKSA XKSA