L i n e a r
W o r k s u r f a c e s
84567
Fully Assembled Worksurface
Figure 2
Figure 2a
Tools Required
-1/4” Hex key (provided)
-Phillips head screwdriver
NOTE
: Due to packaging restrictions, the foot is
not
factory assembled to the 40” leg.
1. Attach a
Foot
to each 40” Leg using two 5/16”-18 x
1-1/2” socket head cap screws and two lock washers.
See
Figure 1
.
2. Attach a
Left
and
Right
Leg Assembly to their respec-
tive ends of the
Modesty Panel
using the 1/4”-20 x
3/4” Phillips pan head machine screws provided.
Tighten securely. See
Figure 2
and
Figure 2a
.
NOTE
: Depending on the height of the Modesty Panel
being installed, it may be necessary to remove
the plastic hole plug at the bottom of each leg.
Figure 1
TYPICAL LEG AND MODESTY PANEL ASSEMBLY
Top support
Leg assembly
1/4”-20 x 3/4”Phillips
pan head machine screws
12” or 26” high
Modesty panel
Plastic hole
plug
Full depth leg
assembly
12” or 26” high
Modesty panel
Plastic hole
plug
1/4”-20 x 3/4”Phillips
pan head machine screws
Lock washers
5/16”-18 x 1-1/2” Socket head
cap screws
40” Leg
Foot
technical furniture
A-1
