PANEL SETUP
Press the
Panel Setup
button.
This will will advance the screen to the PANEL SETUP screen 1/2.
Jockey Pump Controllers
Technical Data MN081024EN
Quick Setup Programming Guide
Eff ective June 2015
QUICK SETUP
The Quick Setup menu allows programming of the Time, Date, Start Pressure, Stop Pressure and
Minimum Run Timer.
NOTE: Before applying power to the controller, ensure the Motor Circuit Protector or Motor Overload Trip Setting are set to match
the motor nameplate full load amps.
START
Press the
MENU
button on the top right of the Main Display Screen.
This will advance the screen to the MENU 1/3 screen.
QUICK SETUP
Press the
Quick Setup
button.
This will advance the screen to the
Quick Setup
screen for setting the Time of Day.
SET TIME
The time of day is set in 24 Hour format.
Using the number buttons, enter the current time of day.
Pressing the
Arrow
button will delete values one character at a time.
Once the time of day is programmed, press the Next button.
This will advance the screen to the Quick Setup screen for setting the date.
Quick Setup programming instructions are continued
on the back of this page.
*NOTE: If programming is interrupted for longer than one
minute, or the Cancel button is pressed during programming,
all values entered in the Quick Setup program will return to the
previously entered values. If the controller has no values entered
(fi rst time setup), the values will return to the factory default
settings.
(For details, download the JOCKEY Touch™ Operation Manual
from our website: www.chfi re.com)
