Page
6
If required, the system can send the
images to an email address when an alarm
occurs.
Control of external devices (outputs)
Your installer can set up your
alarm system to switch external
devices, such as lights or heating
systems, on or off.
Devices can switch on or off automatically,
such as when the system is set or
according to a schedule. Alternatively, you
can switch them on or off manually from
the control unit or using a remote control.
HUA/panic/duress alarms
You can generate Hold-Up
Alarm (HUA), otherwise
known as a panic alarm, from the control
unit, a remote control, hand-held HUA
transmitter or using a separate panic
button.
You can generate a duress alarm (to
indicate that you are accessing the system
under duress) by entering a pre-defined
access code at the keypad.
Installer remote access
The installer has a separate Installer
menu, which contains the options needed
to configure your system. The menu can
be accessed through the keypad on the
control unit.
An alternative is to allow the installer to
access your system remotely over the
internet or through a telephone network,
which may provide service benefits.
You have the ability to enable or disable
remote access as required through the
User menu.
Two-way speech communication
If configured, the control unit can send a
pre-recorded speech message to one or
more telephone numbers when a specified
alarm or alert occurs.
Once received, the recipient can initiate a
two-way conversation with a user at the
control unit using the control unit’s built-in
microphone and loudspeaker.
Wide range of user options
Authorised users can access a User menu
from the control unit. The menu contains
options to record voice memos, add users,
omit/shunt zones, view log information,
test the system, configure the system and
switch devices (outputs) on or off.
You can find full details of the user options
in the i-on Style Administration and User
Manual.
Ability to omit zones
You can omit a zone before setting the
system (see page 10). Omitting a zone
temporarily excludes it from setting.
You may want to omit a zone to prevent
false alarms if, for example, the area it
protects is going to be occupied while the
rest of the system is set.
Full logging
The control unit logs all actions,
alarms and alerts. You can review
the logged events through the
User menu.
Jamming and tamper monitoring
i-on Style uses advanced techniques to
protect your system continuously against
possible jamming or tamper attacks.
Comprehensive test options
The User menu contains a
comprehensive set of options
that you can use to test the
system or to determine the
owner of a device such as a proximity tag
or remote control.
Содержание i-on Style
Страница 11: ...Page 11 NOTES...
