User Menu Options
Page 45
attribute (as set up by the installer). For most zone
types, a chime occurs only when the system is unset.
Remote Access
Use this option to enable or disable remote access to
the control unit from the web interface or
SecureConnect.
Note:
By default, this feature is off for security reasons.
Make sure that any installer requesting access is your
authorised installer. Switch off remote access once the
installer has finished.
Level 4 Update
Use this option to enable or disable access to the
control unit from the level-4 user. There can be only one
level-4 user, which only the installer can create.
The level-4 user is able to:
a) Update the firmware and language files at the control
unit automatically or using the web interface.
b) Log into the user menu or web interface and change
the level-4 user name and code.
The level-4 user cannot perform other tasks, such as to
set or unset the system, omit zones, etc.
To switch facilities on or off:
1.
Select
System Config
– Facilities On/Off
.
2.
Use
or
to choose the facility, then
or
to switch it on or off.
3.
Press
.
Setting the date and time
You can use
System Config
– Set Date & Time
to set the date and time.
You may need to do this if, for example, the control unit lost all power for an
extended period of time.
Select the option, enter the date (dd/mm/yyyy) and then the time.
Note:
The installer may have set up the control unit to obtain its time
automatically from the SecureConnect service. The internal clock adjusts
itself for daylight saving in Spring and Autumn.
