Eaton HMIVU07CUNBE, Инструкция

Страница: 6 / 16

6
To view the alarm popup window again at any time, press the “ATC-900 IN ALARM”
indicator on the Controller View screen.
Controller View Screen 4.2
The Controller View shows a much more detailed view of a single controller. Note: this
will be the default screen for a single-view firmware HMI. The top area contains a
status grid with 6 indicators. Status indicators change from gray to a yellow or red
color when active.
Below the status indicators are the
Source 1, Source 2, and Load detail
windows. These windows include
graphical and numerical represen-
tations of voltage, frequency, and
phase loss/unbalance as well as
status indication and a trend screen
button
(Section 4.5). If your
controller has a DCT Module add-
on, you will see additional Load
metering including kilowatts, kVAR,
kVA, power-factor, and three-phase
current.
Status
Indication
Trend Screen
Voltage/Freq./Phase-loss/
Unbalance Indicators