14
GREEN MOTION DC 44/66 EV CHARGER USER MANUAL
MN192005EN March 2023 www.eaton.com
It is mandatory to install and maintain the units with the latest system updates to enable new features and bug
fixes, or the guarantee conditions may be voided.
For units that are online, this must be done via the Eaton Charging network manager software platform.
Please refer to the Eaton Charging network manager user manual, available on
www.eaton.com
, for further
details. For units that are offline, please contact your Eaton service representative via:
BGTechSupport@eaton.com.
7.1 How to put the unit as out of order
The Green Motion DC 44/66 EV charger can be set as out of order by following the steps below:
1. On site method: Press the emergency stop button.
2. Remote method: Access the Eaton Charging network manager and set the unit as out of order.
7.2 Station updates
7.3 Cleaning or replacing filters
Check the filters on a yearly basis to ensure that they are not obstructed, and they work properly.
In case of obstruction, filters need to be replaced as soon as possible and Eaton recommends not to use the
unit and wait for the replacement of the filters.
Before starting any operation, please contact your Eaton service epresentative via:
BGTechSupport@eaton.com.
When the charging station reaches the end of its service life, the end user should contact professional and qualified
personnel for disposal instructions. Please refer to
www.eaton.com/recycling
for further details.
7.4 Disposal
The EU Directive on Waste Electrical and Electronic Equipment (WEEE) (Directive 2012/19/EU) establishes
common rules on the management of electrical and electronic equipment and minimize its impact — from
design until disposal — on the environment. As a manufacturer of electrical and electronic equipment, Eaton
actively supports the requirements of the WEEE Directive.
In compliance with the EU standard EN 50419 for marking of electrical and electronic equipment, we include
the crossed-out wheeled bin symbol on our products. This symbol alerts users that these products should be
recycled in accordance with local environmental regulations and not discarded with household waste. When
end users recycle WEEE they are helping to ensure that they are neither incinerated nor sent to landfills,
minimizing potential negative impact on human health and the environment.
Any device that is no longer needed must therefore be returned to the distributor or disposed to an authorized
collection and recycling center in the area. Eaton encourages all its customers and end users to make
responsible decisions when it comes to disposing products.
Eaton is not responsible for the transportation of the device to the collection point or recycling center.