Eaton Fuller FTS 108LL Series, Инструкции для водителя

Страница: 19 / 21

19
The maintenance items below must be observed to prevent fails in transmission, resulting
in unnecessary repairs that are not covered for warranty.
1. Air System and Connections
•
Check daily for leaks, worn hoses and air lines; repair instantly.
•
If the vehicle has air dehumidification checks if the system is working correctly.
Repair as needed.
•
Check and repair air compressor as is needed, preventing that lubricate oil enter in
the air system of the vehicle.
2. Clutch Housing Mounting
•
Check all capscrews of clutch housing for looseness.
3. Clutch Release Bearing (Not Shown)
•
Remove hand hole cover and check radial and axial clearance in release bearing.
•
Check relative position of thrust surface of release bearing with thrust sleeve on
push-type clutches.
4. Clutch Pedal Shaft and Bores
•
Pry upward on shafts to check wear.
•
If excessive movement is found, remove clutch release mechanism and check
bushing on bore and wear on shafts.
5. Lubricant
•
Change at specified service intervals.
•
Use only the types and grades as recommended.
Preventive Maintenance