Eaton FO-6406A-ASX, Инструкции для водителя, Страница: 2 / 22

Warnings & Cautions
Warnings & Cautions
Read the entire driver instructions before operating this transmission.
Before starting a vehicle always be seated in the driver's seat, select “N”
on the shift control, and set the parking brakes.
If engine cranks in any gear other than neutral, service your vehicle imme-
diately!
Before working on a vehicle, parking the vehicle, or leaving the cab with
the engine running, place the transmission in neutral, set the parking
brakes, and block the wheels.
For safety reasons, always engage the service brakes prior to selecting
gear positions from "N".
Do not release the parking brake or attempt to select a gear until the air
pressure is at the correct level.
Before operating the PTO, refer to “Transmission Power Take Off Opera-
tion”.
Battery (+) and (-) must be disconnected prior to any type of welding on any
AutoShift™ equipped vehicle.
It is a requirement that the driver of a commercial vehicle specified under
paragraph A sections 1-6 of FMCSA regulation 392.10 need only cross rail-
road grade crossings in a gear that permits the vehicle to complete the
crossing without a change of gears.
This can only be achieved by utilizing the Manual “M” mode. Please refer
to pages 2 and 9 for correct manual mode operation.
WARNING
CAUTION
IMPORTANT