39
USER MANUAL FERNTEL IP4 / IP160
March 2022 www.eaton.com
5.1.6.2 Register or deregister users 2-6 (co-users)
Main menu\User list\n UserName\Registration\
register/deregister
Navigate to the
Register
or Deregister action switch in the
Registration
menu of the co-user n, whom you want to
register or deregister. Press the
key to perform the re-registration. To confirm the action, the text messages
OK
is then
briefly superimposed in the display and the phone returns to the open
User list
menu.
5.1.6.3 Register users 2-6 (co-users)
Main menu\User list\n UserName\Registration\
Settings
Navigate to the
Settings
element in the
Registration
menu of co-user n, whom you want to register or whose
registration you want to change. Then press the
key to open the
Registration
dialog, which is described below.
Protocol:..............
Selection parameter for selection of the protocol to be used
H323
Protocol H323
TH323
Protocol TH323
SH323
Protocol SH323
SIP
Protocol SIP
TSIP
Protocol TSIP
SIPS
Protocol SIPS
Name: .................
Input parameter for optional specification of the user name.
Number: ...............
Input parameter for optional specification of the user number.
Passw.: ...............
Input parameter for optional specification of a user password.
VoIP Gatekeeper: ......
Open dialog of the same name to specify the gatekeeper.
5.1.6.3.1 Setting of the VoIP Gatekeeper Page 39
Options: ..............
Open the dialog of the same name to specify options.
5.1.6.3.2 Options tones Page 40
5.1.6.3.1 Setting of the VoIP Gatekeeper
5.1.6.3.1.1 VoIP Gatekeeper H323, TH323 and SH323
Gatekeeper ID..........
Designation of the following input parameter line.
....................
Input parameter to specify the Gatekeeper ID.
Primary Gatekeeper
Designation of the following input parameter line.
1)
..................
Input parameter to specify the primary Gatekeeper IP address.
Secondary Gatekeeper
Designation of the following input parameter line.
1)
..................
Input parameter to specify the optional secondary Gatekeeper IP address.
The IP addresses are input in text mode. The periods “.” to separate the various address segments must also be input. Preferably
this is achieved with key 1, which must be pressed for at least 2.0 s to switch the input to text mode, and then selecting the “.”
symbol by pressing it multiple times.
1)
5.1.6.3.1.2 VoIP Gatekeeper SIP, TSIP & SIPS
Name:.................
Input parameter for optional specification of the domain name.
Proxy.................
Designation of the following input parameter line.
1)
..................
Input parameter to specify the proxy.
Proxy 2................
Designation of the following input parameter line.
1)
..................
Input parameter for optional specification of an alternative proxy 2.
STUN:.................
Open dialog to specify the STUN/TURN server settings.
The proxy is input in text mode. If you input IP addresses, the periods “.” to separate the various address segments must also be
input. Preferably this is achieved with key 1, which must be pressed for at least 2.0 s to switch the input to text mode, and then
selecting the “.” symbol by pressing it multiple times.
1)
5.1.6.1 Activate users 1-6
Main menu\User list\n UserName\
Activate
Navigate to the activate action switch in the user menu of the user whom you want to make the activated user of the
phone. Then press the
key to perform the activation. To confirm the action, the text messages OK is then briefly
superimposed in the display and the phone returns to the open
User list
menu.
